Forklift Attachments Los Angeles - Many different jobs would be impossible without the help of forklift attachments. There are numerous forklift attachments that make jobs faster and safer to complete. Forklift operators require training for each attachment they will be using as well as their general forklift training.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
Forklift attachments can replace existing attachments or may be added to a machine that doesn’t already have one. Various considerations need to be taken prior to adding or replacing any forklift attachment. These considerations include the kind of forklift, the machine’s capacity, the number of hydraulic functions required to power the attachment’s and the type of carriage.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. There are further safety issues to take into consideration which can be discussed in more detail below.
Forklift Rating and Re-Rating
Forklifts are given lift capacity ratings by the manufacturer which will need to be adjusted if adding or changing a forklift attachment. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. However, only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. Once the forklift manufacturer has re-rated the machine, it will ideally have a new specification plate that is factory authorized. The upgraded specification plate replaces the original plate and needs to be installed with the new forklift rating showing.
Equipment Upgrades
When dealing with forklift attachments it is important to note that a forklift’s hydraulic function is made up of a valve on the forklift with a lever located close to the operator which provides two passages of pressurized hydraulic oil to power the attachment features. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. In this circumstance, it is common to add one or more valves as needed. There are numerous ways a valve can be added. The manufacturers of forklifts create accessories to simplify hose and valve routing. However, the parts and labor to install these can be so expensive as to make this option impractical. Alternative methods include adding a solenoid valve in conjunction with a hose or cable reel that diverts oil flow from an existing function. Unfortunately, hose and cable reels can sometimes block the operator's view and can be easily damaged. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Proper training must be obtained prior to fitting any forklift attachment. Operators need to be competent with removing, operating and fitting the attachment before using it.
Two important safety factors must be considered before the use of any forklift attachment.
The nominal load rating will be reduced on the forklift once any attachment is applied. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Secondly, the forklift’s center of gravity will be affected when any forklift attachment is added. Obviously, the stability of the forklift is reduced. Since the attachment’s weight is prominent in front of the fulcrum point on the forklift, the operator needs to drive the machine as though it is partially loaded even before it is carrying a load. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. Every attachment should be listed on the forklift capacity data plate.
To maintain safety, special checks need to be completed before using any forklift attachment. The forklift attachment needs to be the right one for the type of forklift being used, appropriate for the load at hand, correctly attached, locked in place and permitted on the data plate of the forklift.
List of Common Forklift Attachments
Discover a list of common forklift attachments and how they are utilized below. This is just a sample list of some of the most popular forklift attachments. Forklift attachments are designed to increase job efficiency for many applications.
SIDESHIFTER:
Allows the operator to move the forks laterally, allowing for easier placement of a load without the need to reposition the entire forklift.
FORK POSITIONERS:
Fork positioners allow the forks to travel apart or together with each other to adjust for different load sizes.
DIMENSIONING DEVICES:
Dimensioning devices offer cargo dimensions to create more warehouse efficiency and better truck and trailer space. This is commonly used with billing systems that record volume.
ROTATOR:
A rotator helps to straighten tilted skids and handle custom load requirements and fast unloading. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp simplifies grasping rounded loads such as barrels. It has numerous pressure settings for handling fragile items with less damage potential. This attachment often has a rotate function to change the load from a vertical to a horizontal position.
CARTON AND MULTIPURPOSE CLAMP:
Allows for grasping a load with a more squared shape, often with pressure settings. Products like cartons, boxes and bales can be moved with this type of attachment.
POLE ATTACHMENTS:
Long, metal pole used in place of forks to lift rolled items such as carpet or linoleum.
SLIP SHEETER OR PUSH-PULL:
Allows operator to transport slip sheets by clamping onto slip sheets, as opposed to pallets, and either pulling the slip sheet onto wide and thin metal forks for loading or pushing the slip sheet to unload. Some variations of the attachment are Save, where the slip sheet is removed for reuse, or Standard.
DRUM HANDLER:
Allows for grasping drums, either with a spring-loaded jaw to grip the top lip of a drum, or with arms that encircle the drum, for transport.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper helps to transfer loose or liquid items into other containers.
MAN BASKET:
The man basket is a lift platform to allow workers to complete jobs with brackets and railings and safety harnesses.
TELESCOPIC FORKS:
The telescopic forks are used in locations with a two pallet stacking design were one shelf is placed right behind another with no aisle between them.
SCALES:
Scales are helpful for allowing operators to transport pallets while weighing them. This stops the need for interrupting work with regular travel to the scales. It can be used in legal-for-trade weights for operations that bill by how much items weigh.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Skips enable quick and safe waste removal to a skip or waste compactor. They may feature a bottom-emptying design or be a roll-forward model.
BOOMS AND JIBS:
Allow for extended reach of a forklift to transport suspended loads or loads that are stacked high or deep. They are available in different setups such as reach over and precision lifting or low profile fixed and extendable lengths.
Forklift Attachment PDF
